Whirlpool dishwasher troubleshooting guide

Whirlpool dishwasher is one of the most trusted dishwasher brands in the world it comes with amazing specifications that makes it easy to use for everyone.

After using your Whirlpool dishwasher for a long time. It will begin to develop several faults especially if you don’t use it as it is designed to be used.

If you have any problem with your Whirlpool dishwasher, then you should read this article to the end because I will explain the common problem of Whirlpool dishwasher and how to troubleshoot it effectively.

What is the most common problem with a Whirlpool dishwasher?

Your Whirlpool dishwasher can develop several problems. It all depends on how you use it and the faulty part of the dishwasher. After several cases of dishwasher problems.

These are the most common problems with Whirlpool dishwashers based on user experience.

  • Dishwasher not cleaning dishes
  • Dishwasher not drying dishes
  • The dishwasher panel has no lights or not responding
  • Dishwasher stopped draining
  • The dishwasher does not clean dishes on
  • the top rack and more. 

How do you diagnose a dishwasher problem?

The most effective method to diagnose a dishwasher problem is to check all parts of the dishwasher to make sure you turn off the machine.

Unplug your dishwasher before checking any part of the machine.

Now if you detect any scratch or something strange in any part of your dishwasher, then you need to check your owner’s manual to solve the problem, if it is minor but if it is severe or complicated, then you need the services of a professional dishwasher technician.

This is the perfect way to diagnose your dishwasher problem.

Whirlpool dishwasher control board problems

Dishwasher control has numerous problems, it shows different signs when it begins to malfunction. You need to take the signs seriously if you want to solve the control board problems quickly.

  • Cycles not starting, sometimes it may be very delayed. When you press the start button, the dishwasher just runs on some cycles.
  • Error codes or flashing lights on your dishwasher.
  • The dishwasher failed to run completely.

If your dishwasher control board problem has become severe then you may consider replacing it.

Follow the simple and easy-to-understand instructions below to replace your dishwasher control board.

  • You need to turn off the power to the dishwasher (unplug it).
  • Now remove the screws securing the control panel.
  • Use a screwdriver to release the tab with the bottom of the panel.
  • Now use a small flathead screwdriver to pry up the tabs to free the thermal fuse.
  • Now you need to detach the ribbon connector to depress the tabs to release the old control board.
  • Immediately, you need to install the new control board.
  • Now insert the tabs in the slots in the control panel and snap it into position.
  • Snap the ribbon connector into place on your new board.
  • Return the wires from the old board to your new board.
  • Snap the thermal fuse into place on the new board.
  • Now change the control board cover.
  • Make sure that you position the control panel correctly and secure it once more with the screws.
  • Now you need to restore power to the dishwasher and see if it will start operating again properly once again.

Whirlpool dishwasher troubleshooting not cleaning    

If your dishwasher is not cleaning your plate properly, then you need to check some parts of your dishwasher and replace or repair them. 

Repair, clean, or change your 

  • Filter
  • Dishwasher tub
  • Spray arms and more. 


  How To Fix Countertop Dishwasher Not Cleaning Properly

Whirlpool dishwasher won’t start but has power    

If your dishwasher is not starting but has power, then you need to check other parts of your dishwasher except the power source.

You can check.

  • Faulty Drive Motor
  • Electrical Issues
  • Incorrect Dishwasher Cycle Settings
  • Touchpad Issue
  • Child Lock is ON
  • The door is Not Closed

Whirlpool dishwasher troubleshooting not starting

You need to follow the structure below if your dishwasher is not started even when you connect it to power.

Immediately you notice that your dishwasher is not working after plugging into an outlet, you need to unplug the unit and wait for one to three minutes and then plug the unit back in. If it does not work now then you need to fix the following problems.


The door is Not Closed

Your dishwasher won’t be able to start, if the door is not closed make sure your dishwasher door is closed before starting it.

Child Lock is ON

Your dishwasher will not be able to start if the child lock mode is ON. Make sure the child lock mode is OFF before you begin to operate your dishwasher.

Check Water Supply

Your dishwasher needs a water supply to function properly and effectively if there is a shortage of water supply then it may be the source of the problem.

Other reasons why your dishwasher may not be starting.

  • Electrical Issues
  • Incorrect Dishwasher Cycle Settings
  • Touchpad Issue
  • Faulty Drive Motor and more. 


  Change Cycles on a Stuck Bosch Dishwasher: 3 steps

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

No votes so far! Be the first to rate this post.

Leave a Comment