Change Cycles on a Stuck Bosch Dishwasher: 3 steps

For the instruction below, it would be best if you changed your cycle on a struck Bosch dishwasher.

Use the Control Panel

The most effective method and easy option are available in the control panel.

A lot of dishwasher owners overlook the Reset Feature in all dishwasher brands. The Reset button on the latest Bosch dishwasher is paired with the Start button, which can confuse some users. Just reset the stuck wash cycle by pressing the Reset button for three to five seconds.

Locate the start button on the control panel and press it for three seconds before releasing it with the door tightly closed. If the dishwasher responds with a pump or motor movement for a few seconds, it is stuck on a paused wash cycle.

Many dishwashers have the Incognito Design, in which the control panel can hide under the countertop immediately when you firmly close the door.

It would be best if you were careful when opening the door with the Incognito Design because the pressurized water can spill out of the door.

Open the door with care so that you will be able to access the control panel.

You need to press the start button firmly and release it before swiftly closing the door. Within five seconds, you will hear some pump movement if the dishwasher was just stuck in a paused cycle. It will complete the current process and use control panel lights or noise to indicate it’s done. Reset the dishwasher for a new bike.

The Reset Feature in the older Bosch dishwasher is not apparent. You need to locate the “drain” or “cancel” button. 

It requires a unique key combination or the Key Dance to reset a paused wash state indicated by special symbols. 

Resetting a dishwasher will activate several parts of the dishwasher, including the drain pump. All water will be pumped out of the machine. Immediately you clear off all water, it will give you a Done or Complete cycle and automatically switch to standby mode.

How do I reset the cycle on my Bosch dishwasher?

To reset the cycle of your Bosch dishwasher.

  1.  It would be best if you start by switching off the power supply and closing the water supply so that you would be able to start the inspection. It will be safer if you can unplug the power cable.
  2.  Now you need to cut off the water supply with the valve below the sink. If you can’t find it, you can use the valve located at the household’s main water supply. 
  3.  Now disconnect the water outlets with the drain hose behind the front panel below the door.
  4.  You can use a screwdriver to remove any mounting brackets installed to hold the machine in place.
  5.  Now you need to remove your dishwasher. 
  6.  It would be best if you started conducting a visual inspection of the whole unit for any signs of bulging. For instance, you can see the prong without disassembling the unit and ordering replacement parts. Carefully inspect the latches on the stationary unit and the moving door.
  7.  If there’s no visible damage, you can check the door switch located inside the door. You can access it when you remove the screw on the fastened panel door. 

Why is my Bosch dishwasher stuck on auto cycle?

You need to hold the Start button down for 5 seconds, letting the timer reset to 1:00 minute. Now you need to Close and wait for two minutes for the dishwasher to drain and complete the cycle, and the light goes out.

Why is my dishwasher not changing the cycle?

Your dishwasher is stuck in the wash mode because the water is not hot enough, or maybe the thermostat is not working effectively.

If the water is not at the designed temperature, it may not be able to progress to the next cycle, and it will not move on to wash the dishes.

How do I change the cycle select on my Bosch dishwasher?

You can follow the instructions and the process in this article to change the cycles and length of your Bosch dishwasher.

The process is simple and effective if you follow the instructions as it is written.

How do you cancel a program on a Bosch dishwasher?

You need to press “Start” on the front of the dishwasher for three seconds to cancel the cycle.

 Now you need to press “On/Off” to finalize the cancelled cycle, then pull the dishwasher’s door handle to yourself so that you can open the door and access the dishes.

Now you know how you can cancel a program on your Bosch dishwasher.

Leave a Comment